Besides the use on the silo, this fork can also be used to distribute large quantities of green waste such as branches, leaves, etc.

The SIV-2500 is a fixed frame with a width of 2.50m. The SIV-4160 and SIV-4740 have hydraulically foldable wings at the sides, allowing them to achieve widths of 4.16m and 4.74m respectively.

Standard

• Heavy duty tines 980mm x 50mm
• Side wings with 3 tines 800mm x 40mm mounted vertically
• Extra wear bar under the tine bar 200x20mm

The post VDMJ SIV appeared first on Kirrane Machinery.

The RotoFeed bale unroller with conveyor belt is designed for the simple and reliable unrolling of round bales of straw, hay and silage.

Where other machines struggle to distribute large or heavy grass bales, the RotoFeed’s conveyor belt system ensures a smooth and even unrolling. All of this requires only very limited power, significantly less than distribution machines using, for example, turbines or knife rollers. The result is much lower fuel consumption and, above all, far less strain on the machine.

The machine is suitable for all diameters of round bales, from small to large, and can unload to both the left and the right.

With the integrated bale fork, the bale can be picked up directly from storage and placed onto the unroller. Afterwards, the operator can drive the fork into the unroller, which is then automatically driven. All functions are operated from inside the cab, without leaving the seat, ensuring comfort, safety and time savings in daily operation.

Standard

• Suitable for round bales of all diameters
• Designed for straw, hay and silage
• Requires very low hydraulic power for the drive
• Adjustable unrolling speed
• Can unload to both the left and the right
• Equipped with an integrated bale fork with automatic coupling and drive

The post VDMJ RotoFeed appeared first on Kirrane Machinery.

Standard

• Heavy-duty hydraulic motor with chain transmission
• 2 tines fixed in conical bush with a centre-to-centre dimension of 280 mm (Ø44 x 1100mm)

The post VDMJ RBA-280 appeared first on Kirrane Machinery.

The mixing system of the bucket consists of a 800 mm diameter ribbon mixer with a counterflow ribbon. The drive of the mixer is provided by a heavy-duty planetary gearbox.

The operation of a standard bucket without options is done by plugging in 2 hydraulic quick couplings and a 12V plug. If the bucket is equipped with options, the operation will be done by means of a joystick box.

Standard

• Used for mixing and distribution of CCM, concentrates, …
• Sheet thicknesses 5 and 8mm
• Driven by planetary gearbox and hydraulic motor
• Auger Ø 800 mm, with counterflow ribbon
• Exit left or right via hydraulic door
• 2nd side unloading is an option
• Widened shovel section especially for shovelling into a trench silo
• Electro-hydraulic control (supplies: 1 double-acting valve + 12V connection)

The post VDMJ CCM-800 appeared first on Kirrane Machinery.

On customer request the bucket can be equipped with a claw on top to pull the feed into the bucket.

Standard

• Mixing system especially for short grass (max. 8cm): fill 50% of the content of the machine with short grass, fill the other 50% with short products
• Planetary drive on the mixer
• Sheet thickness 6 and 8 and 10 mm
• Distribution with floor chain 80/12
• Stainless steel base plate over which the floor chain slides
• Hydraulic door on 1 side (2 sides is an option)
• Electrical operation (joystick box)

The post VDMJ DTMM appeared first on Kirrane Machinery.

At the customer’s request, the bucket can be equipped with a claw on top of the bucket to pull the feed into the bucket.

Standard

• Distribution of short grass and maize
• Distribution with floor chain 80/12
• Distribution roller in door opening, separately driven by heavy-duty hydraulic motor, independent of floor chain
• Hydraulic door on 1 side (2 sides is an option)
• Electro-hydraulic control
• Free return is recommended but not necessary

The post VDMJ DTGK appeared first on Kirrane Machinery.

At the customer’s request, the bucket can be equipped with a claw on top of the bucket to pull the feed into the bucket.

Standard

• Distribution of short grass (max. 8cm), maize, concentrates, …
• Distribution with floor chain 80/12
• Distribution roller in door opening, driven by heavy-duty hydraulic motor
• Hydraulic door on 1 side (2 sides is an option)
• Electrical operation (joystick box)
• Free return is recommended but not necessary

The post VDMJ DTGXK appeared first on Kirrane Machinery.

The feed bucket discharges as standard to the left side, on one side, by means of a large hydraulic door. Optionally, the bucket can be equipped with two doors, allowing discharge to both the left and right sides.

At the customer’s request, the bucket can be equipped with a grab mounted on top of the bucket to pull the feed into the bucket.

Standard

• Distribution of short grass (max. 8 cm), maize, concentrates, mixed feed, etc.
• High-strenght steel plate: 6–8–12 mm
• Planetary drive integrated in the auger
• Auger Ø 400 mm, 8 mm thick, guided by wear-resistant plastic strip.
• Left-side discharge via hydraulic door

The post VDMJ FeedTastic appeared first on Kirrane Machinery.

As standard, the machine has straight sides. The exit tube will stick out +/- 25cm. If, for example, a trench silo has to be shovelled, the option ‘extended side’ is recommended.

To prevent bridging, the machine is fitted with an extra stirring auger as standard.

Standard

• Distribution of short grass (max. 8cm), maize, concentrates, …
• Chopping of beets and potatoes = option
• 1 Auger Ø300
• Driven by hydraulic motor and single chain 1″ reinforced on hardened sprockets
• Plate thickness 6 mm
• Exit left OR right
• Stirring auger prevents bridging above the distribution auger
• Extended side for easy scooping next to a wall (scooping width will be equal to total width)

The post VDMJ EV-4030 appeared first on Kirrane Machinery.

Standard

• Distribution of maize and concentrates
• Chopping of beets and potatoes = option
• 2x Auger Ø300
• Extended sides as standard
• Driven by hydraulic motor and single chain 1″ reinforced on hardened sprockets
• Stirring auger prevents bridging above the distribution augers

The post VDMJ TwinFeed appeared first on Kirrane Machinery.