Beet Processing | Kirrane Machinery

VDMJ BMH

admin-darragh — Thu, 05 Mar 2026 16:03:45 +0000

The BMH is a beet bucket that cleans and cuts beet. This machine is available in 3 widths: 1.80m, 2.15m and 2.60m. Depending on the size, this bucket can be used in combination with articulated loaders, bulldozers, front loaders, telehandlers, but also in the rear lift of the tractor.

The machine consists of a large drum roller that removes the dirt. The dirt is then collected in a collector at the bottom of the chassis. This collector can be emptied simply by tilting the machine forward (without any additional controls). The cutting mill is located on the left side of the machine and can discharge the beet directly into the stable feed troughs, feed alley, wheelbarrow or into the mixing wagon.

The counter blade of the cutting mill is equipped with a hydraulic stone protection as standard. This will open very briefly (1 second) and close again immediately if there is a stone in the cutting mill.

If there are a lot of stones between the beets, it is advisable to also take a stone protection device above the drum roll.

Standard

Hydraulically driven
Cutting mill standard on the left side
Cutting mill is fitted with hydraulic stone protection as standard

The post VDMJ BMH appeared first on Kirrane Machinery.

VDMJ BMT

admin-darragh — Thu, 05 Mar 2026 16:01:47 +0000

The BMT is a beet cutting bucket that is available in 3 widths: 1.37m, 1.91m and 2.45m. Depending on the size, this bucket can be used in combination with articulated loaders, bulldozers, front loaders, telehandlers, but also in the rear lift of the tractor. This beet bucket has a hydraulically driven cutting roller over the full width, which enables it to cut beet at high speed. As a standard, the cutting roller is equipped with mechanically adjustable counter blades. Optionally, the counter blades can be equipped with a hydraulic stone protection. This will open briefly (1 second) and close again immediately if there is a stone in the cutting mill.

Another option worth mentioning is the potato cutting kit: with this option, potatoes can be cut as well as beets.

Standard

Hydraulically driven
Full width cutting roll
The cutting roller is fitted with mechanically adjustable counter blades

The post VDMJ BMT appeared first on Kirrane Machinery.

VDMJ BME1

admin-darragh — Thu, 05 Mar 2026 16:00:31 +0000

The BME1 stationary electric beet chopper is a low-cost, professional solution for cutting and cleaning beets and potatoes. The cut substance is blown out at the top of the machine. The chopper is powered by 400V.

The post VDMJ BME1 appeared first on Kirrane Machinery.

VDMJ BME-Eco

admin-darragh — Thu, 05 Mar 2026 15:59:03 +0000

The BME-Eco stationary electric beet chopper is a low-cost, professional solution for cleaning and cutting beet and potatoes. The cut substance falls out at the bottom of the chopper and is typically collected in a wheelbarrow, in a shovel bucket, or is dropped on the ground. The chopper is powered as standard by 400V but can optionally be powered by 230V.

The post VDMJ BME-Eco appeared first on Kirrane Machinery.

VDMJ BM-ES

admin-darragh — Thu, 05 Mar 2026 15:54:58 +0000

The BM-ES stationary electric beet chopper is a low-cost, professional solution for cutting beet and potatoes. The cut substance falls out at the bottom of the chopper and is typically collected in a wheelbarrow, in a shovel bucket, or is dropped on the ground. The chopper is powered as standard by 400V but can optionally be powered by 230V.

The post VDMJ BM-ES appeared first on Kirrane Machinery.